WPX‑2000TOGO Battery Replacement Guide

The WPX‑2000TOGO was designed with a user‑serviceable battery, making replacement quick and straightforward. With just a few screws and a simple connector, you can swap in a fresh battery and get your speaker running at full capacity again. Battery specifications: 11.1V • Li‑ion • 97.68Wh

Step 1: Remove Bottom Screws

Loosen the screws on the bottom panel of the WPX‑2000TOGO to access the internal battery compartment.

Step 2: Remove Battery Bracket Screws

Inside the compartment, locate the metal bracket holding the battery in place. Loosen the screws securing this bracket and lift it away.

Step 3: Disconnect and Replace Battery

Disconnect the battery connector from the socket. Remove the old battery and install the new 11.1V Li‑ion 97.68Wh battery. Reconnect the battery connector securely, reinstall the bracket, and close the bottom panel.

If you run into any issues during replacement, visit support.geminisound.com for additional troubleshooting resources or to contact our support team.