GSBR-20 – FM Radio Setup & Reception Tips

Gemini GSBR-20 - FM Radio Setup & Reception Tips

The GSBR-20 includes a built-in FM tuner that allows you to listen to local radio stations. If you're having trouble accessing or maintaining a clear signal, follow these steps to improve performance.

Problem: FM Mode Not Activating

• Power on the speaker and press the rotary knob to cycle through modes until “FM” is selected.
• If the speaker doesn’t respond, restart it and try again.
• Make sure the AUX cable is connected - this functions as the FM antenna.

Problem: Poor Reception or Static

• Extend the AUX cable fully and position it away from metal surfaces or walls.
• Reposition the speaker to a higher or more open location.
• Avoid placing the speaker near other electronics that may cause interference.

Problem: No Stations Found

• Enter FM mode and long press the Play/Pause button to auto-scan available stations.
• Use the Next/Previous buttons to cycle through saved stations.
• If no stations are saved, try scanning again in a different location.

Additional Tips

• The FM frequency range supported is 87.5 - 108 MHz.
• Reception quality may vary depending on your location and surroundings.
• The AUX cable must be fully inserted and extended for best results.

Need Help?

If you're unable to resolve the issue using the steps above, please contact Gemini Sound Customer Service at (732) 346-0061 or visit support.geminisound.com for further assistance. We're here Monday through Friday, 9AM to 5PM EST.