购物车

您的购物车为空

文章： My speakers sound flat

My speakers sound flat

Flat, lifeless sound almost always comes down to an EQ setting somewhere in your signal chain. Work through the gear one piece at a time and you'll usually find it fast.

Check the EQ on every device in the chain

Start with a clean baseline, then adjust to taste:

If your powered speaker has an onboard EQ, make sure the levels are set the way you want them and nothing is cut too far.
If you're running a mixer or a controller, check the EQ on those units too. A low band pulled down on the mixer will thin out the sound just as much as one on the speaker.

Set a neutral starting point

Set the high, mid, and low bands to about 50% each, then listen. From there, bring up whatever the sound is missing until it feels balanced for the room and the music you're playing.

My speakers do not power on

If your Gemini speakers won't turn on, this guide walks you through the connections, power cable, and internal fuse so you can find the cause fast.

If your Gemini player will not read files from a USB flash drive, check the file format and where the files are stored. The CDM-4000 and CDMP-1500 read MP3 only, from the root folder.