As‑togo series – true wireless linking (tws)

(AS‑08TOGO / AS‑10TOGO / AS‑12TOGO / AS‑15TOGO)

Overview

Newer revisions of the AS‑TOGO series support True Wireless Linking (TWS), which allows two compatible AS‑TOGO speakers to be wirelessly linked together so audio from a single Bluetooth source plays through both speakers simultaneously.

This applies to updated versions of the following models:

AS‑08TOGO
AS‑10TOGO
AS‑12TOGO
AS‑15TOGO

⚠️ Important: Older revisions of AS‑TOGO speakers do not support TWS. Both speakers must be confirmed as the newer TWS‑enabled version before attempting to link them.

Confirm Your AS‑TOGO Speakers Support TWS

Both speakers must be the newer TWS‑enabled version. The most reliable way to confirm this is the presence of a “BT LINK” button on the speaker itself.

On AS‑TOGO speakers, the BT LINK button is located on the rear panel, on the bottom section of the media control panel, and is typically the far‑left button.

The “NOW WITH TRUE WIRELESS LINKING” sticker on the retail box can be used as a clue that the unit includes TWS when shopping in retail stores.

If a speaker does not have a BT LINK button, it is an older revision and cannot be wirelessly linked.

How to Link Two AS‑TOGO Speakers Using TWS

Once TWS support has been confirmed on both speakers, follow one of the methods below.

Method 1: Link the Speakers First, Then Connect Your Phone (Recommended)

Power on both AS‑TOGO speakers
- The display will briefly show “HI”
Press the MODE button on each speaker until Bluetooth mode is selected
- The display will show “BL:UE”
On one of the speakers, press the BT LINK button
The speakers will automatically search for and connect to each other
- When successfully linked, the display will show “BT:BT”
Open the Bluetooth settings on your phone and connect to the AS‑TOGO speaker

Audio will now play through both speakers.

Method 2: Connect Your Phone First, Then Link the Second Speaker

Turn on both speakers and set them to Bluetooth mode (“BL:UE”)
Connect your phone to one AS‑TOGO speaker using Bluetooth
Press the BT LINK button on the second speaker
The speakers will automatically link together

Additional Notes and Tips

Only one Bluetooth source can be connected at a time
Volume can be adjusted independently on each speaker
If the speakers fail to link:
- Power both speakers off
- Turn them back on
- Repeat the linking steps from the beginning

Need Further Assistance?

If you continue to experience issues linking your AS‑TOGO speakers or have additional questions, contact Gemini Technical Support for further assistance.

Support Portal: https://support.geminisound.com