Cesta

La cesta está vacía

Artículo: How to connect a microphone to your WRX series speaker

How to connect a microphone to your WRX series speaker

Connecting a microphone to your Gemini Sound WRX series speaker takes three quick steps. Here's how to set it up on the WRX-843 and WRX-900TOGO.

Prepare the channel

Before you plug the microphone in, turn the channel volume down and press the LINE/MIC switch to MIC mode. Setting the level low first keeps you from getting a sudden burst of feedback when the mic connects.

LINE/MIC switch set to MIC mode

Connect the microphone

Plug your mic into the input jack using an XLR or 1/4" cable.

Microphone connected to the input jack with an XLR or 1/4 inch cable

Set your level

Once the microphone is connected, turn the Master Volume up to your preferred level. Then speak into the mic and use the LEVEL knob to dial in the volume until it sounds right.

Adjusting the LEVEL knob while speaking into the microphone

WRX series: How to connect a line-level source to your WRX speaker

How to connect a line-level source to a Gemini WRX series speaker, covering stereo devices like DJ mixers over RCA, 1/8", or XLR, and mono instruments like keyboards and active guitars.

WRX Series: how to set up your speaker

A quick setup guide for the WRX Series column array. Check the box contents, assemble the column on the subwoofer base, and connect power safely.