SOSP-8 – Bluetooth & TWS Pairing Troubleshooting

If you're having trouble connecting your SOSP-8 speaker to a device or linking two speakers together for stereo sound, this guide walks you through the most common pairing issues and how to resolve them.

Bluetooth Pairing Issues

Quick Fix:

• Power on the SOSP-8 and press the Bluetooth button for 3 seconds to enter pairing mode.
• On your phone or tablet, go to Bluetooth settings and look for “Gemini SOSP-8” in the list of available devices.
• Select it to pair. A solid Bluetooth LED indicates a successful connection.
• If the speaker doesn’t appear, turn Bluetooth off and back on on your device, then retry.
• If pairing still fails, power cycle the speaker and clear any previous pairings from your device.

NFC Pairing (if supported by your device):

• Ensure NFC is enabled on your phone.
• Tap your phone near the NFC zone on the speaker (usually near the control panel).
• Follow the on-screen prompt to complete pairing.

TWS (True Wireless Stereo) Pairing Issues

Quick Fix:

• Power on both SOSP-8 speakers.
• Press and hold the TWS button on both units until they begin linking.
• Once paired, one speaker will act as the left channel and the other as the right.
• Ensure both speakers are within 30 feet of each other and not connected to other devices.
• If TWS fails, unpair both speakers from any devices and retry the TWS pairing process.

Note: TWS pairing only works between two SOSP-8 units. You cannot link with other Gemini models.

Common Fixes for Persistent Pairing Problems

• Reset the speaker by powering it off and on.
• Forget the SOSP-8 from your device’s Bluetooth list and re-pair.
• Ensure the speaker is fully charged before attempting pairing.
• Avoid pairing in areas with heavy wireless interference.

Need More Help?

If you’ve tried the steps above and still need assistance, contact Gemini Support:

Phone: 732-346-0061
Email: support@geminisound.com
Live Chat: www.geminisound.com