How to daisy chain GHSI series active and passive outdoor speaker sets
If you're expanding your audio setup with multiple Gemini Sound GHSI-W525BT outdoor speaker sets, this guide walks you through daisy chaining up to four speakers so they all play at the same time.
What you need
- Two pairs of GHSI series speakers: you'll need two sets to get four speakers total.
- 1/8-inch AUX cable: make sure it's long enough to reach between speakers in your setup.
- Power outlets: one for each active speaker.
Step-by-step guide
- Unbox your speakers. Start by unboxing all four GHSI series speakers.
- Connect the first pair. Connect the active speaker to the passive speaker in the first set using the included speaker wire.
- Set up for daisy chaining. Use the auxiliary output on the first pair's active speaker to connect to the auxiliary input of the second pair's active speaker with the 1/8-inch cable.
- Repeat for additional pairs. If you have more than one additional pair, repeat the step above, connecting each pair sequentially using the auxiliary output and input.
- Power the speakers. Plug in each active speaker to a power source. All active speakers need power for the setup to work correctly.
- Test the setup. Play audio through the system to confirm all speakers are working and playing at the same time.
Tips for best performance
- Cable management: keep cables organized to avoid tangling and potential damage.
- Speaker placement: place speakers strategically to cover the area you want evenly.
- Power considerations: make sure you have enough outlets, or use a power strip with surge protection for safety.
Troubleshooting
- No sound from all speakers: check all power connections and make sure each active speaker is plugged in.
- Uneven sound: verify all connections and make sure the 1/8-inch cables are securely connected.
Still stuck? Contact our customer service team for further help.